View source for 24ch DMX 8 RGB flood controller


=== DIP switch ===
* 1 - DMX through (pass DMX data as is, do not remove any channels)
* 2 - Use exponential lookup table to map channel value to PWM value (otherwise, mapping is linear)
* 3 - Invert output (when inverted in software, 0 will result in 0.05% PWM, so small glow might be visible)

=== S1 switch ===
Power On - normal operation, listen on DMX input
Press - test mode 1, rainbow
Press - test mode 2, cycle RGB (0, R, G, B, RG, RB, GB, RGB, 0, ...)
Press - default

=== LED ===
DMX activity


[[File:24ch-DMX-8-RGB-1.jpg]]


'''Solder resistors'''

[[File:24ch-DMX-8-RGB-2.jpg]]

'''Solder capacitors'''

[[File:24ch-DMX-8-RGB-3.jpg]]

'''Solder remaining components and insert ICs'''

[[File:24ch-DMX-8-RGB-4.jpg]]