File list
Jump to navigation
Jump to search
This special page shows all uploaded files.
| Date | Name | Thumbnail | Size | User | Description | Versions |
|---|---|---|---|---|---|---|
| 13:54, 16 May 2015 | 4-wire.JPG (file) |  |
984 KB | Admin | 1 | |
| 13:54, 16 May 2015 | 5-measuring.JPG (file) |  |
847 KB | Admin | 1 | |
| 13:54, 16 May 2015 | 6-welded.JPG (file) |  |
968 KB | Admin | 1 | |
| 14:10, 16 May 2015 | 7-painting.JPG (file) |  |
183 KB | Admin | 1 | |
| 14:10, 16 May 2015 | 8-testfit.JPG (file) |  |
198 KB | Admin | 1 | |
| 14:10, 16 May 2015 | 9-layout.JPG (file) |  |
1.01 MB | Admin | 1 | |
| 14:10, 16 May 2015 | 10-choirtest.JPG (file) |  |
145 KB | Admin | 1 | |
| 14:11, 16 May 2015 | 11-setup.JPG (file) |  |
1.02 MB | Admin | 1 | |
| 14:11, 16 May 2015 | 12-action.jpg (file) |  |
168 KB | Admin | 1 | |
| 18:54, 16 May 2015 | DSCI0028.JPG (file) |  |
1.18 MB | Admin | 1 | |
| 18:56, 16 May 2015 | Slingshot-2.JPG (file) |  |
972 KB | Admin | 1 | |
| 18:57, 16 May 2015 | Slingshot-3b.JPG (file) |  |
539 KB | Admin | 1 | |
| 19:01, 16 May 2015 | Slingshot-4.JPG (file) |  |
1,013 KB | Admin | 1 | |
| 19:02, 16 May 2015 | Slingshot-6.jpg (file) |  |
325 KB | Admin | 1 | |
| 07:39, 22 May 2015 | Servo pulse width.png (file) |  |
7 KB | Toozie21 | came from http://bansky.net/blog_stuff/images/servo_pulse_width.png | 2 |
| 13:41, 25 May 2015 | C5 C7 Incandscents.jpg (file) |  |
62 KB | Ronp5683 | 1 | |
| 13:43, 25 May 2015 | Mini Incandscents.jpg (file) |  |
108 KB | Ronp5683 | 1 | |
| 13:46, 25 May 2015 | Mini Incandscents.png (file) |  |
411 KB | Ronp5683 | 2 | |
| 13:55, 25 May 2015 | Mini LED.png (file) |  |
501 KB | Ronp5683 | 1 | |
| 14:17, 25 May 2015 | Smart LED.png (file) |  |
60 KB | Ronp5683 | 1 | |
| 14:18, 25 May 2015 | Dumb RGB.png (file) |  |
60 KB | Ronp5683 | 1 | |
| 14:21, 25 May 2015 | ColorTemperature.png (file) |  |
2 KB | Ronp5683 | 1 | |
| 12:08, 31 May 2015 | Pixels bullets.png (file) |  |
413 KB | Ronp5683 | 1 | |
| 12:31, 31 May 2015 | LED Matrix.png (file) |  |
949 KB | Ronp5683 | 1 | |
| 12:33, 31 May 2015 | Pixel covers.png (file) |  |
480 KB | Ronp5683 | 1 | |
| 16:51, 3 June 2015 | LightBoard.PNG (file) |  |
9 KB | Ronp5683 | 1 | |
| 16:54, 3 June 2015 | DMX Timing.PNG (file) |  |
12 KB | Ronp5683 | 1 | |
| 17:09, 3 June 2015 | Wiring Direct Power.PNG (file) |  |
25 KB | Ronp5683 | 1 | |
| 17:12, 3 June 2015 | Wiring Local Power.PNG (file) |  |
28 KB | Ronp5683 | 1 | |
| 17:17, 3 June 2015 | Wiring POE.PNG (file) |  |
36 KB | Ronp5683 | 1 | |
| 17:18, 3 June 2015 | Wiring POE Pixel Extender.PNG (file) |  |
40 KB | Ronp5683 | 1 | |
| 17:19, 3 June 2015 | Wiring Local Pixel Extender .PNG (file) |  |
34 KB | Ronp5683 | 1 | |
| 10:31, 5 June 2015 | Anatomy of ssr.png (file) |  |
13 KB | Admin | 1 | |
| 15:32, 5 June 2015 | Mini-Tree Layout.PNG (file) |  |
11 KB | Ronp5683 | 1 | |
| 18:36, 8 June 2015 | ACN E131 Header.png (file) |  |
33 KB | Ronp5683 | 1 | |
| 17:30, 10 June 2015 | Renard Protocol.PNG (file) |  |
12 KB | Ronp5683 | 3 | |
| 17:30, 10 June 2015 | Pixelnet Protocol.PNG (file) |  |
10 KB | Ronp5683 | 1 | |
| 18:20, 30 June 2015 | 10w-ws2811-kit-v2-s1.jpg (file) |  |
127 KB | RobG | step 1, solder resistors | 1 |
| 09:39, 3 July 2015 | 10w-ws2811-kit-v2-s2.jpg (file) |  |
61 KB | RobG | step 2, cut wires as close as possible to PCB | 1 |
| 09:43, 3 July 2015 | 10w-ws2811-kit-v2-s3.jpg (file) |  |
131 KB | RobG | step 3, solder diodes | 1 |
| 09:45, 3 July 2015 | 10w-ws2811-kit-v2-s4.jpg (file) |  |
112 KB | RobG | step 4, solder bypass cap, LDO, and transistors | 1 |
| 09:48, 3 July 2015 | 10w-ws2811-kit-v2-s5.jpg (file) |  |
92 KB | RobG | step 5, solder inductors | 1 |
| 09:50, 3 July 2015 | 10w-ws2811-kit-v2-s6.jpg (file) |  |
52 KB | RobG | step 6, bend capacitor's leads | 1 |
| 09:53, 3 July 2015 | 10w-ws2811-kit-v2-s7.jpg (file) |  |
46 KB | RobG | step 7, make sure negative lead is facing towards header | 1 |
| 09:56, 3 July 2015 | 10w-ws2811-kit-v2-s8.jpg (file) |  |
71 KB | RobG | step 8, cut all wires as close as possible to PCB | 1 |
| 09:57, 3 July 2015 | 10w-ws2811-kit-v2-s8-2.jpg (file) |  |
78 KB | RobG | step 8, cut all wires as close as possible to PCB | 1 |
| 09:58, 3 July 2015 | 10w-ws2811-v2.jpg (file) |  |
134 KB | RobG | finished board with LED | 1 |
| 18:41, 13 July 2015 | 0-stolen design.jpg (file) |  |
207 KB | Admin | 1 | |
| 18:44, 13 July 2015 | 1-wire form.JPG (file) |  |
213 KB | Admin | 1 | |
| 18:49, 13 July 2015 | 2-bending jig.JPG (file) |  |
197 KB | Admin | 1 |
