Uploads by RobG
Jump to navigation
Jump to search
This special page shows all uploaded files.
| Date | Name | Thumbnail | Size | Description | Versions |
|---|---|---|---|---|---|
| 18:20, 30 June 2015 | 10w-ws2811-kit-v2-s1.jpg (file) |  |
127 KB | step 1, solder resistors | 1 |
| 09:39, 3 July 2015 | 10w-ws2811-kit-v2-s2.jpg (file) |  |
61 KB | step 2, cut wires as close as possible to PCB | 1 |
| 09:43, 3 July 2015 | 10w-ws2811-kit-v2-s3.jpg (file) |  |
131 KB | step 3, solder diodes | 1 |
| 09:45, 3 July 2015 | 10w-ws2811-kit-v2-s4.jpg (file) |  |
112 KB | step 4, solder bypass cap, LDO, and transistors | 1 |
| 09:48, 3 July 2015 | 10w-ws2811-kit-v2-s5.jpg (file) |  |
92 KB | step 5, solder inductors | 1 |
| 09:50, 3 July 2015 | 10w-ws2811-kit-v2-s6.jpg (file) |  |
52 KB | step 6, bend capacitor's leads | 1 |
| 09:53, 3 July 2015 | 10w-ws2811-kit-v2-s7.jpg (file) |  |
46 KB | step 7, make sure negative lead is facing towards header | 1 |
| 09:56, 3 July 2015 | 10w-ws2811-kit-v2-s8.jpg (file) |  |
71 KB | step 8, cut all wires as close as possible to PCB | 1 |
| 09:57, 3 July 2015 | 10w-ws2811-kit-v2-s8-2.jpg (file) |  |
78 KB | step 8, cut all wires as close as possible to PCB | 1 |
| 09:58, 3 July 2015 | 10w-ws2811-v2.jpg (file) |  |
134 KB | finished board with LED | 1 |
| 09:11, 23 August 2015 | 20w-ws2811-kit-v4-1.jpg (file) |  |
180 KB | 20W WS2811 Kit v4, PCB + BOM | 1 |
| 09:12, 23 August 2015 | 20w-ws2811-kit-v4.jpg (file) |  |
168 KB | 20W WS2811 kit v4 assembled with LED | 1 |
| 09:13, 23 August 2015 | 20w-ws2811-kit-v4-2.jpg (file) |  |
137 KB | 20W WS2811 kit v4, solder resistors | 1 |
| 09:14, 23 August 2015 | 20w-ws2811-kit-v4-3.jpg (file) |  |
135 KB | 20W WS2811 kit v4, solder diodes | 1 |
| 09:15, 23 August 2015 | 20w-ws2811-kit-v4-4.jpg (file) |  |
154 KB | 20W WS2811 kit v4, solder 0.1uF capacitor, 78L05 LDO, and 3 2N3904 transistors | 1 |
| 09:16, 23 August 2015 | 20w-ws2811-kit-v4-5.jpg (file) |  |
169 KB | 20W WS2811 kit v4, solder 47uF capacitor | 1 |
| 09:18, 23 August 2015 | 20w-ws2811-kit-v4-6.jpg (file) |  |
110 KB | 20W LED, trim leads | 1 |
| 09:18, 23 August 2015 | 20w-ws2811-kit-v4-7.jpg (file) |  |
147 KB | 20W WS2811 kit v4, solder LED, bottom | 1 |
| 09:52, 11 November 2015 | 24ch-DMX-8-RGB-1.jpg (file) |  |
198 KB | Fully assembled board | 1 |
| 09:53, 11 November 2015 | 24ch-DMX-8-RGB-2.jpg (file) |  |
307 KB | Resistors | 1 |
| 09:53, 11 November 2015 | 24ch-DMX-8-RGB-3.jpg (file) |  |
306 KB | Capacitors | 1 |
| 10:01, 11 November 2015 | 24ch-DMX-8-RGB-4.jpg (file) |  |
298 KB | ICs | 1 |
| 11:07, 11 November 2015 | Dmx24rgb-top.png (file) |  |
102 KB | 24ch DMX 8 RGB flood controller top | 1 |
| 11:07, 11 November 2015 | Dmx24rgb-BOM.pdf (file) |  |
35 KB | 24ch DMX 8 RGB flood controller BOM | 1 |
| 11:23, 17 January 2016 | 10w-grb.jpg (file) |  |
136 KB | 10W flood board GRB "mode" (default) | 1 |
| 11:23, 17 January 2016 | 10w-rgb.jpg (file) |  |
136 KB | 10W flood board RGB "mode" | 1 |
| 11:24, 17 January 2016 | 0.1uf.jpg (file) |  |
73 KB | Installing 0.1uF | 1 |
| 13:54, 17 January 2016 | 10w-ws2811-kit-v2.jpg (file) |  |
132 KB | 2 | |
| 13:54, 17 January 2016 | 10k.jpg (file) |  |
35 KB | 2 | |
| 11:24, 26 March 2016 | 10w-xor-v1-kit.jpg (file) |  |
171 KB | 10W XOR v1 driver kit | 1 |
| 11:25, 26 March 2016 | 20w-xor-v1-kit.jpg (file) |  |
302 KB | 20W XOR v1 driver kit | 1 |
| 11:26, 26 March 2016 | 20w-xor-v1-bom-txt.jpg (file) |  |
189 KB | 20W XOR v1 BOM | 1 |
| 11:26, 26 March 2016 | 10w-xor-v1-bom-txt.jpg (file) |  |
144 KB | 10W XOR v1 BOM | 1 |
| 11:27, 26 March 2016 | 10w-xor-v1-pcb.jpg (file) |  |
309 KB | 10W XOR v1 PCB | 1 |
| 11:27, 26 March 2016 | 20w-xor-v1-pcb.jpg (file) |  |
377 KB | 20W XOR v1 PCB | 1 |
| 11:27, 26 March 2016 | 20w-xor-v1.jpg (file) |  |
630 KB | 20W XOR v1 assembled | 1 |
| 11:28, 26 March 2016 | 10w-xor-v1.jpg (file) |  |
488 KB | 10W XOR v1 assembled | 1 |
| 12:25, 26 March 2016 | 20w-ws2811-v5-tp.jpg (file) |  |
74 KB | 20W WS2811 v5 Test Points | 1 |
| 12:26, 26 March 2016 | 20w-ws2811-v5-rgb.jpg (file) |  |
46 KB | 20W WS2811 v5 RGB configuration | 1 |
| 12:26, 26 March 2016 | 20w-ws2811-v5-grb.jpg (file) |  |
45 KB | 20W WS2811 v5 GRB (default) configuration | 1 |
| 19:10, 19 April 2016 | 10w-xor-v1-test.jpg (file) |  |
115 KB | 1 | |
| 07:59, 11 September 2016 | 10w-ws2811-v6-pcb.jpg (file) |  |
112 KB | 1 | |
| 08:31, 11 September 2016 | Led-cut.jpg (file) |  |
86 KB | 1 | |
| 08:31, 11 September 2016 | Led-uncut.jpg (file) |  |
76 KB | 1 | |
| 15:54, 13 October 2016 | 3-4-3 T connections.jpg (file) |  |
36 KB | 3-4-3 T connections | 1 |
| 15:55, 13 October 2016 | 3-4-3 T connector.jpg (file) |  |
49 KB | 3-4-3 T connector | 1 |
| 15:55, 13 October 2016 | Flood connection 1.png (file) |  |
142 KB | Flood connection 1 | 1 |
| 16:51, 13 October 2016 | Input cap.jpg (file) |  |
95 KB | 10W v6 input cap fix | 1 |
| 10:26, 16 February 2017 | 20w-ws2811-v5-33p.jpg (file) |  |
48 KB | 1 | |
| 16:03, 7 May 2017 | Bld-4.jpg (file) |  |
106 KB | Buffer/line driver connection scenarios | 1 |
