Difference between revisions of "Jumbo Tree Ornaments"
(Created page with "One year I wanted to put some big RGB LED ornaments in a tree but all the commercial things I could find were opaque plastic and not nearly big enough. So I made some of my ow...") |
|||
| Line 2: | Line 2: | ||
'''Materials''' | '''Materials''' | ||
| + | |||
:* Coroplast | :* Coroplast | ||
:* Hot glue | :* Hot glue | ||
| Line 8: | Line 9: | ||
:* An RJ45 breakout board | :* An RJ45 breakout board | ||
| − | '''Shapes''' | + | '''Shapes & Assembly''' |
| + | |||
I Googled "3D geometric shapes" and found plenty of examples, some I could print out and cut out of coroplast, then hot glue together. For example, here's a cube that's one piece of corplast; scored, folded and glued together it made for a nice box for testing the concept. | I Googled "3D geometric shapes" and found plenty of examples, some I could print out and cut out of coroplast, then hot glue together. For example, here's a cube that's one piece of corplast; scored, folded and glued together it made for a nice box for testing the concept. | ||
[[File:DSCI0454.JPG|250px]] [[File:DSCI0460.JPG|250px]] [[File:DSCI0458.JPG|250px]] | [[File:DSCI0454.JPG|250px]] [[File:DSCI0460.JPG|250px]] [[File:DSCI0458.JPG|250px]] | ||
| + | |||
| + | Since all I had was scrap coroplast and no really large pieces, most of the shapes required cutting out individual pieces for a shape and hot gluing them together at the seams. It was a tedious process but it worked -- and I got rid of a lot of loose pieces of coroplast that weren't much good for anything, such as these two: | ||
| + | |||
| + | [[File:DSCI0468.JPG|250px]] [[File:DSCI0653.JPG|250px]] | ||
Revision as of 13:29, 12 September 2016
One year I wanted to put some big RGB LED ornaments in a tree but all the commercial things I could find were opaque plastic and not nearly big enough. So I made some of my own that could plug directly into a Ren48LSD's outputs.
Materials
- Coroplast
- Hot glue
- Short 6" pieces of PVC
- Dumb RGB strips (the roll kind)
- An RJ45 breakout board
Shapes & Assembly
I Googled "3D geometric shapes" and found plenty of examples, some I could print out and cut out of coroplast, then hot glue together. For example, here's a cube that's one piece of corplast; scored, folded and glued together it made for a nice box for testing the concept.
Since all I had was scrap coroplast and no really large pieces, most of the shapes required cutting out individual pieces for a shape and hot gluing them together at the seams. It was a tedious process but it worked -- and I got rid of a lot of loose pieces of coroplast that weren't much good for anything, such as these two:
