Buffer/line driver

From diychristmas.org wiki
Revision as of 11:42, 1 February 2019 by RobG (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Buffer/line driver

  • How to connect
  • Possible connection scenarios

Bld-1.png

Bld-back.jpg

By default, BLD is configured to work with 6V-24V power. To make it fully effective at 5V, change solder bridge as below (shorted on the LV side.)

Bld-lv.png

Bld-connection.jpg

Bld-4.jpg

Retrieved from "https://www.diychristmas.org/wiki/index.php?title=Buffer/line_driver&oldid=2708"