Waterproofing buffer/line driver

From diychristmas.org wiki

Revision as of 07:14, 2 February 2019 by RobG (talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Jump to navigation Jump to search

To waterproof buffer/line drivers, you will need the following:

Silicone modified conformal coating - MG Chemicals Silicone Modified Conformal Coating, 55 ml Bottle with Brush Cap
Dual wall adhesive lined 3/8" heat shrink tubing - DW1S3X-9.5 Dual Wall Adhesive Lined 3:1 Heat Shrink Tubing 9.5mm (3/8") - Black
Dielectric grease - Permatex 22058 Dielectric Tune-Up Grease, 3 oz. Tube
Standard 1/2" heat shrink tubing (optional)

Retrieved from "https://www.diychristmas.org/wiki/index.php?title=Waterproofing_buffer/line_driver&oldid=2725"