Santa's Workshop
Revision as of 12:34, 10 September 2016 by Admin (talk | contribs) (Created page with " center|500px The goal of this project was to construct 4-walled, roofed buildings with windows to be set outside and protect animatronic figures...")
The goal of this project was to construct 4-walled, roofed buildings with windows to be set outside and protect animatronic figures from inclement weather. This was a huge project but in the end, a very enjoyable one that visitors truly enjoyed.
Materials:
- 12, 4x8 sheets of translucent coroplast
- 20, 10' lengths of EMT pipe
- Assorted screws, washers, lockwashers, nuts, wing nuts
- Contact cement, silicone glue, paint, colored duct tape, rolls of self-adhesive vinyl
- Clear plastic sheeting, zip ties, garland, strings of LED lights
- Renzilla controller set up to control incandescent and LED strings, LED spotlights, servos.