Jumbo Tree Ornaments
Jump to navigation
Jump to search
One year I wanted to put some big RGB LED ornaments in a tree but all the commercial things I could find were opaque plastic and not nearly big enough. So I made some of my own that could plug directly into a Ren48LSD's outputs.
Materials
- Coroplast
- Hot glue
- Short 6" pieces of PVC
- Dumb RGB strips (the roll kind)
- An RJ45 breakout board
Shapes I Googled "3D geometric shapes" and found plenty of examples, some I could print out and cut out of coroplast, then hot glue together. For example, here's a cube that's one piece of corplast; scored, folded and glued together it made for a nice box for testing the concept.
